Monday, January 25, 2016
Service implementation patterns and performance
Performance in service oriented environments is often an issue. This is usually caused by a combination of infrastructure, configuration and service efficiency. In this blog article I provide several suggestions to improve performance by using patterns in service implementations. The patterns are described globally since implementations can differ across specific use cases. Also I provide some suggestions on things to consider when implementing such a pattern. They are technology independent however the technology does of course play a role in the implementation options you have. This blog article was inspired by a session at AMIS by Lucas Jellema and additionally flavored by personal experience.
Monday, January 4, 2016
Simple IoT security system using Raspberry Pi 2B + Razberry + Fibaro Motion Sensor (FGMS-001)
In this article I'll describe how I created a simple home-brew burglar detection system to send me a mail when someone enters my house (so I can call the police). First my choice for the components is explained. Next how these components combine to achieve the functionality wanted. Based on this article you should be able to avoid certain issues I encountered and have a nice suggestion for a simple relatively cheap burglar detection system.
My purpose was to create a simple security system based on a Raspberry Pi. A Raspberry Pi is a tiny computer which can run a Debian like Linux distribution called Rasbian. I wanted to avoid going to low-level into sensor configuration and programming. That's why I decided early on to use an extension board and not directly attach the sensors to the Raspberry Pi. I decided to go for the Razberry. I also looked at the GrovePi and Arduino. Both are still too low-level for my tastes though. The Razberry is an extension board for the Raspberry which provides a Z-Wave controller chip. Z-Wave is a wireless protocol popular in the area of home automation. This was an attractive option since if in the future I would want to use additional sensors or maybe even use a commercial home automation system, I could very well get compatibility out of the box. For the sensor, I decided on the Fibaro FGMS-001 Motion Sensor. This is a multi-sensor which allows detection of motion, temperature, luminiscence and vibrations. It can even detect tampering and earthquakes (which is relevant since I live in the Dutch city of Groningen).
Z-Wave.Me (the company providing the Razberry), provides software for the Razberry called Z-Way. There are several alternatives. One of the most popular seems to be Domoticz which is provided with OpenZWave. Domoticz allows quite extensive home automation but I was having difficulty getting the sensor to work with OpenZWave so I decided to go with Z-Way. Z-Way supported the sensor out of the box. With the Z-Way server however it was difficult to automate actions based on sensor values. How I solved this is also described in this article.
My purpose was to create a simple security system based on a Raspberry Pi. A Raspberry Pi is a tiny computer which can run a Debian like Linux distribution called Rasbian. I wanted to avoid going to low-level into sensor configuration and programming. That's why I decided early on to use an extension board and not directly attach the sensors to the Raspberry Pi. I decided to go for the Razberry. I also looked at the GrovePi and Arduino. Both are still too low-level for my tastes though. The Razberry is an extension board for the Raspberry which provides a Z-Wave controller chip. Z-Wave is a wireless protocol popular in the area of home automation. This was an attractive option since if in the future I would want to use additional sensors or maybe even use a commercial home automation system, I could very well get compatibility out of the box. For the sensor, I decided on the Fibaro FGMS-001 Motion Sensor. This is a multi-sensor which allows detection of motion, temperature, luminiscence and vibrations. It can even detect tampering and earthquakes (which is relevant since I live in the Dutch city of Groningen).
Z-Wave.Me (the company providing the Razberry), provides software for the Razberry called Z-Way. There are several alternatives. One of the most popular seems to be Domoticz which is provided with OpenZWave. Domoticz allows quite extensive home automation but I was having difficulty getting the sensor to work with OpenZWave so I decided to go with Z-Way. Z-Way supported the sensor out of the box. With the Z-Way server however it was difficult to automate actions based on sensor values. How I solved this is also described in this article.
